CAN Bus Communication 20A 48 Volt Battery Charger For Lithium Battery EV

CAN Bus Communication Battery Charger 48V 20A for Lithium Battery EV Application

Brief Description:

Advanced high frequency switching mode power supply technology.

With CAN bus communication port.

Designed for 48V lithium or lead acid battery. 

Custom-made charging method is available.

Single 110V or 230Vac.

Rated output voltatge is 48V 20A.

Max charging voltage could be 58.8V according to battery types.

Intelligent 4 steps charging with pre-charge, CC, CV and floating or automatic cut-off.

Protections: Short circuit, Over-voltage, Over-temperature, Reverse Polarity.

Aluminum casing, light weight, portable.

Suit to charge 48V e-forklifts, e-club cars or other EVs.

CAN communication
CAN communication
(Two independent CAN BUSes)

CAN2.0A, 250kbps,

• Enable charger, stop charger.
• Configure Current, voltage charging, pre-charge current.
• Authenticate battery before charging (Option).
• Monitor charger parameters: Voltage, current, current cut off, alarms, status of charger. Support update boot loader by CAN

Technical Specs.:

1) Dimensions(LxWxH): 260 x 150 x 90 mm

2) Net weight: 5.5 KG

3) Max charging voltage(CV): 58.4V / 54.6V / 58.8V

4) Floating voltage: 

5) Max output current (CC): 20 amps

6) Charging method: pre-charge, CC, CV, floating / trickle or shut off

7) AC input voltage: 110 / 230Vac

8) AC input freq.: 50 / 60 Hz

9) AC plug: UK, US, AU, India etc

10) Output connector type: Clips, Anderson, etc.

11) Enclosure: Aluminum

Ralated Charger of 1200W: